Heat transfer vinyl has a heat-activated adhesive backing, which is activated between 160-190C depending on the brand and type.
Cut this HT vinyl with a vinyl cutter, remove what you do not want, and apply it to your material using a heat press, or simply using a household iron.
It is also possible to layer (add different colours on top of one another), except no layering on Flock.
HT vinyls are available in many different colours and types. Our main types of HT vinyls are Smooth, Glitter, Flocked (velvet-texture), and Metallic.
HT vinyl is not just for fabrics, it can also work with any substrate that can withstand a minimum temperature of 160C applied to it for more than 10 seconds; eg mugs (use with mug press machine), wood, leather, etc.
Only when using Printable HT, would you need to use Application film to transfer your cut image. Solid colours do not need application tape since most already have a Removal backing material that needs to be removed while hot or cold (depending on the usage instructions).
For Info on how to use HT materials, click this link
Heat Transfer settings
The heat transfer material offered by Silhouette America® may be used with a heat press.
For the Smooth Heat Transfer Material you may heat press between 330 - 335ºF (165 - 168ºC) for 17-20 seconds using firm even pressure.
For the Flocked Heat Transfer Material you may heat press between 310 - 330ºF (154 - 165ºC) for 10 - 15 seconds using firm even pressure.
For the Printable Heat Transfer for Light Fabrics, you may heat press at 345ºF (174ºC) for 30-40 seconds using firm even pressure.
For the Printable Heat Transfer for Dark Fabrics, you may heat press between between 340 - 350ºF (171 - 177ºC) for 15-20 seconds using firm even pressure.
TIPS:
A few other tips & tricks for heat transfer are as follows:
- Do not apply heat transfer material to Nylon fabrics or plastics (vinyl/PVC, ABS, etc.)
- Smooth heat transfer material should never be layered
- For best results, apply ample pressure while using your iron's cotton setting
- You may alternately use a heat press if you have access to such
- Keep things as flat as possible when ironing on initially
- Make sure to cut on the "dull" surface. When cutting heat transfer material, you will need to always cut the "dull" surface side of the material. The "shiny" side is actually the built-in transfer tape. The "dull" side is the heat-activated adhesive side. Never cut on the "shiny" side.
- Always remember to mirror. When cutting heat transfer material, it is vital to always horizontally mirror your images (by right-clicking and selcting to mirror horizontally). That way, your text and asymmetrical images will come out correctly when laid onto your desired surface and not be backwards.
- Use a thin pressing cloth or Teflon sheet rather than a thick cloth
- Heat transfer material should never be dried on high heat in a dryer—only medium or low
- Highly textured fabrics or loosely knit fabrics are not ideal for use with heat transfer material
- Once your project is finished and the transfer surface has been removed leaving your project, you may wish to again iron (directly for flocked and with a thin pressing cloth for smooth) without the additional plastic surface in order to provide additional heated pressure
- After wearing (if a garment of any sort), you will want to wash the garment inside-out
Cause & Solutions:
The following can cause concerns with heat transfer material not adhering properly onto a fabric surface:
- Fabric type in question is not conducive to adhesive - The heat transfer material is intended for cotton fabric surfaces. It will not work with Nylon fabrics or plastics (vinyl/PVC, ABS, etc.). Similarly, polyester will not work well with heat transfer materials since the adhesive type cannot bond properly to a plastic-based surface. Also, textured fabrics or loosely knit fabrics are not ideal for use with the heat transfer product.
- Wrong iron settings used - Too little or too much heat as well as too little or too much time can affect the adhesive quality and how it is bonded onto the fabric surface. Over or under ironing can cause issues.
- Washing or drying conditions too harsh - Garments should be turned inside-out prior to washing and fabrics with the heat transfer material applied should not be placed in a dryer with a high heat setting.
Heat Transfer
Application Tape for Heat Transfer - 32cm wide
32cm wide, sold per meter
Flex Paillettes Heat Transfer - Violet
25cm wide x 1m long for cotton and polyester this HT is a crystal iridescent layer with a RAINBOW EFFECT
Silicone paper - A4 (Matt finish)
1x A4 size sheet
Flex Classic Matt Heat Transfer - Ardesia
Flex Classic Matt Heat Transfer - Gun Powder
Flex Classic Matt Heat Transfer - Military Blue
Application Tape for Heat Transfer - 24cm wide
24cm wide, sold per meter
Flex Galaxy Heat Transfer - Nebula
24cm wide x 1m long for cotton and polyester
Flex Soft Mirror Heat Transfer - Military White
25cm wide x 1m long for cotton and polyester SOFT MIRROR is a cut material, whose peculiarity is a polished mirror...
Flex Paillettes Heat Transfer - Silver
25cm wide x 1m long for cotton and polyester this HT is a crystal iridescent layer with a RAINBOW EFFECT
Flex Galaxy Heat Transfer - Uranus
24cm wide x 1m long for cotton and polyester
Silkscreen Sheets
12" (30cm) x 15" (38cm)
Silhouette
Flex Classic Matt Heat Transfer - Neon Green
25cm wide x 1m long for cotton and polyester
Flex Galaxy Heat Transfer - Gentauni
24cm wide x 1m long for cotton and polyester
Printable (inkjet) Heat Transfer - Dark
5 sheets 8.5" x 11"
For dark fabrics
Printable (inkjet) Heat Transfer - Light
5 sheets 8.5" x 11"
For light fabrics
Flex Classic Matt Heat Transfer - White
25cm wide x 1m long for cotton and polyester
Flex Galaxy Heat Transfer - Neon Peach
24cm wide x 1m long for cotton and polyester
Flex Classic Matt Heat Transfer - Acqua Green
25cm wide x 1m long for cotton and polyester
Flex Classic Matt Heat Transfer - Sapphire
25cm wide x 1m long for cotton and polyester
Flex Classic Matt Heat Transfer - Baby Blue
25cm wide x 1m long for cotton and polyester
Flex Classic Matt Heat Transfer - Neon Blue
25cm wide x 1m long for cotton and polyester
Smooth Heat Transfer - Lime Green
12" (30cm) x 1 meter
Flex Classic Matt Heat Transfer - Sky Blue
25cm wide x 1m long for cotton and polyester
Flex Classic Matt Heat Transfer - Blue Layette
25cm wide x 1m long for cotton and polyester
Flex Galaxy Heat Transfer - Neon Green
24cm wide x 1m long for cotton and polyester
Flex Galaxy Heat Transfer - Neon Yellow
24cm wide x 1m long for cotton and polyester
Flex Star Dust Heat Transfer - Jade
25cm wide x 1m long for cotton and polyester